DIY Lightspeed Passive Attenuator http://diyaudioprojects.com/Solid/DIY-Lightspeed-Passive-Attenuator/ (http://diyaudioprojects.com/Solid/DIY-Lightspeed-Passive-Attenuator/)
"
The Lightspeed Passive Attenuator designed by George Stantscheff (GeorgeHiFi on the audio forums) is by far the very best passive attenuator that I have heard. There is perfect clarity, a widened soundstage, separation of instruments, and seemingly infinite detail. What makes this passive preamplifier interesting is that there are no contact points in the form of a "wiper" as in the case of a potentiometer or "switches" as may be with a discrete stepped attenuator. The key components in the Lightspeed Attenuator are Silonex NSL-32SR2 Optocouplers (PDF - 34kB). The optocoupler device is a sealed unit which consists of a high performance LED that shines on a light dependent resistor (LDR).
The operating principle of the optocoupler is fairly simple. As the intensity of the LED varies, so does the internal resistance of the LDR (resistance decreases with increasing light). So in the case of the Lightspeed Attenuator, we change the volume (resistance) by changing the intensity of the LED. By using a series and shunt combination of optocouplers the attenuator can be configured to produces a constant input and output impedance, regardless of where the voltage control setting is.
It is worth mentioning that the Lightspeed Passive Attenuator is not for every audio system though. First off, it is a passive attenuator so there is no gain. Also, your source output impedance needs to be less than about 100 ohms which makes it suitable for use with several sources. The Lightspeed Attenuator works best with amplifiers that have input impedance greater than about 50k. If you would like to use the attenuator with a low input impedance amplifier best results are achieved by using a suitable buffer between the attenuator and amplifier. "
(http://diyaudioprojects.com/Solid/DIY-Lightspeed-Passive-Attenuator/Optocoupler.gif)
Muy bueno
Esto tengo que probarlo, que si funciona me vendría de perlas para mi próximo ampli.
-- o --
Rodrigo
Que bueno!!!!!! :o
Esto es justamente lo mismo que yo tenía pensado hacer, de hecho incluso pensaba usar exactamente los mismos optoacopladores (mas que nada porque el fabricante, silonex, te lo da todo mascao ;)). Pero con los esquemáticos ya hechos e instrucciones paso a paso para el montaje la tarea será mucho más sencilla ;)
Muchas gracias nepro!!!!
(por cierto, por si a alguien le interesa el tema, podeis encontrar más información en la página del fabricante de los optoacopladores, que tiene una sección especial dedicado a audio: http://www1.silonex.com/audiohm/index.html (http://www1.silonex.com/audiohm/index.html). De hecho creo que los esquemáticos del Lightspeed están basados en las notas de aplicación del propio fabricante: http://www1.silonex.com/audiohm/levelcontrol.html (http://www1.silonex.com/audiohm/levelcontrol.html) y por si a alguien le interesa, silonex también propone esquemáticos para hacer selectores de audio basados en sus optoacopladores http://www1.silonex.com/audiohm/softswitch.html (http://www1.silonex.com/audiohm/softswitch.html)) :D
Hola,
Ya llevaba un tiempo sin postear, y es que últimamente ando un poco liado y a la búsqueda de empleo... además estoy empezando a darle forma a un proyecto DIY totalmente propio, que llevaba tiempo rondando mi cabeza... si consigo concretar algo ya os contaré ;) ;)
Pues estoy echándole un vistazo a los links de Nepro y Alcaudon y me parece un concepto muy interesante y original, ahora solo falta comprobar que tal funciona... Así que si alguno de vosotros lo monta no dudéis en comentar los resultados.
Un saludo a todos.
La idea es buena, pero no original (los previos Melos lo llevaban hace una década o más) y ha habido otras implementaciones.
GeorgeHifi suele tener buenas ideas, tendré que verlo bien. Pero creo que este sistema tenía la pega que introducía más distorsiones que una resistencia normal, u otro tipo de atenuación.
Alguien ya ha probado con éste diseño?
Yo de momento no he tenido tiempo para probarlo, aunque está bien que lo recuerdes pues tengo que hacer un pedido a RS y puedo mirar de pedir el material necesario, según quite un rato lo monto. Así llegado el momento podré compararlo con el atenuador por pasos chino que me compré en eBay y con el Joshua Tree.
No se para cuando será semejante comparativa, pero contad con ella pues me interesa mucho ver si funciona ese invento.
-- o --
Rodrigo
Bueno, he mirado en RS y no tienen el NSL-32SR2 :-\, lo tienen en Farnell con lo que compraré unos pocos en el siguiente pedido que les haga para ver si preparo este atenuador.
-- o --
Rodrigo